Parking and Front Fog Lamp Bracket Replacement (Enclave)

Parking and Front Fog Lamp Bracket Replacement (Enclave)

Removal Procedure

1. Remove the front wheelhouse liner.




2. Remove the front bumper fascia molding in order to remove the forward parking and front fog lamp bracket screw (1).
3. Remove the front bumper fascia.




4. Remove the lower front bumper fascia to bracket screw (1).
5. Remove the 3 upper and 3 lower screws (2).
6. Remove the lower push lock retainer (4) and bolt (3).




7. Remove the parking and front fog lamp bracket (1) from the front bumper fascia (2).

Installation Procedure




1. Position and align the parking and front fog lamp bracket (1) to inside the front bumper fascia (2).






Notice: Refer to Fastener Notice.

2. Install the lower push lock retainer (4) and bolt (3).
3. Install the 3 upper and 3 lower screws (2).
4. Install the front bumper lower fascia to bracket screw (1).

2.5 N.m (22 lb in)

5. Install the front bumper fascia.




6. Install the forward parking and front fog lamp bracket screw (1) under the lower front bumper fascia molding.

2.5 N.m (22 lb in)

7. Install front bumper fascia molding.
8. Install the front wheelhouse liner.