Air Cleaner Fresh Air Duct/Hose: Service and Repair

Air Cleaner Outlet Duct Replacement

Removal Procedure




1. Remove the fuel injector sight shield.
2. Disconnect the positive crankcase ventilation (PCV) fresh air tube from the camshaft cover fitting.
3. Reposition the tube out of the way.




4. Loosen the air cleaner outlet duct clamps (1) at the mass air flow (MAF)/intake air temperature (IAT) sensor and throttle body.
5. Remove the air cleaner outlet duct.

Installation Procedure




1. Install the air cleaner outlet duct to the MAF/IAT sensor and the throttle body.

Notice: Refer to Fastener Notice.

2. Tighten the air cleaner outlet duct clamps (1) at the MAF/IAT sensor and throttle body.

Tighten the clamp to 4 N.m (35 lb in).




3. Position the PCV tube.
4. Connect the PCV fresh air tube to the camshaft cover fitting.
5. Install the fuel injector sight shield.