Luggage Carrier Replacement

Luggage Carrier Replacement (Enclave)

Removal Procedure




1. Using a flat-bladed tool, carefully remove the finish covers (1, 2) from the luggage carrier side rails (4).
2. Remove the fasteners (3) that retain the side rails to the roof panel.
3. Remove the side rails from the roof panel by sliding forward.

Installation Procedure




1. Position the side rails (4) to the roof panel.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the fasteners (3) which retain the side rails to the roof panel, starting with the rearmost fasteners first on each side.

Tighten the fasteners to 5 Nm (44 lb in).

3. Install and secure the finish covers (1, 2) to the side rails.