Parking Lamp: Service and Repair

Parking and Front Fog Lamp Bracket Replacement (Enclave)

Removal Procedure

1. Remove the front wheelhouse liner.
2. Remove the front bumper fascia.



3. Remove the lower front bumper fascia to bracket screw (1).
4. Remove the 3 upper and 3 lower screws (2).
5. Remove the lower push lock retainer (4) and bolt (3).
6. Release the two fog lamp bracket tabs from the front bumper fascia, push in order to release the tabs.




7. Remove the parking and front fog lamp bracket (1) from the front bumper fascia (2).

Installation Procedure




1. Position and align the parking and front fog lamp bracket (1) to inside the front bumper fascia (2).
2. Secure the locking tabs to the front bumper fascia.





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the lower push lock retainer (4) and bolt (3).
4. Install the 3 upper and 3 lower screws (2).
5. Install the front bumper lower fascia to bracket screw (1) and tighten to 2.5 Nm (22 lb in).
6. Install the front bumper fascia.
7. Install the front wheelhouse liner.