Idle Speed Control Assembly - Repair Kit
Model Year 1982Bulletin No. 82-I-237
File in Group 64A
Number 37
Date Feb. '83
SUBJECT: Idle Speed Control Assembly Repair Kit
MODELS AFFECTED: All 1981, 1982 Gasoline Engines
A revised gear and shaft has been released for 1982 production Idle Speed Control Assemblies. Idle Speed Control Assemblies with the new gear and shaft may be identified by a yellow dot on the housing near the shaft:
In order to provide these improvements to the service assemblies, two
(2) separate service repair packages have been released to repair 1981 and 1982 Idle Speed Control Assemblies (I.S.C.). Applications are as follows:
Part Number Application
17079749 For "J" Series Equipped
With Engine Code "G"
17079750 All Other Engines
The repair kits contain a gear and shaft assembly, a boot, grease, and an instruction sheet.
The repair packages are to be used only if the following condition exists:
Idle Speed Control Assembly runs forward and reverse, but plunger does not extend or retract properly.
WARRANTY INFORMATION
Use applicable Labor Time Guide I.S.C. Assembly R & R
*Kit Installation .3 Hr.
* Other Labor Hours