Gear Clusters

To conduct this procedure a suitable hydraulic press tools J-36182-1, J-36182-2 and J-36185 are required.

1. Refer to accompanying image, and proceed as follows:

a. Position tool J-36182-1 and J-36182-2 onto a suitable hydraulic press.

b. Position transaxle case/gear cluster assembly (A) onto tool J-36182-1 and J-36182-2. Align shift rail and shaft pilots to the fixture.

c. Position J-36185 onto shaft support bearings and pilots.

d. Using the press, separate the shaft and gear clusters from transaxle case.