Repair Procedure:

ALL MODELS (FIGURE 1, 2, 3, & 4)

ITEM PART NAME LEAK CAUSE CORRECTION

2 Transmission Oil Low Bolt Torque Retorque and Recheck
Pan Bolts

Gasket Leak Remove and Replace
Gasket

Broken R.T.V. Bead Remove Cover and
Reseal with R.T.V.

3 T.V. Cable Connector Cocked Remove Connector and
Connector "C" and interfering with Reinstall
mount

Seal Damaged Remove and Replace Seal

Connector Cracked Remove and Replace Cable

Fill Tube "D" Seal Missing or Remove Fill Tube and
Damaged Replace Seal

Electrical "O" Ring Missing or
Remove Connector and
Connector "E" Damaged Replace Seal

Connector Missing or Remove and Replace
Damaged Connector

4 Manual Shaft Seal Assembly Remove and Replace Seal
Damaged

5 Governor Cover "O" Ring Damaged Remove and Replace "O"
Ring

Low Bolt Torque Retorque Bolts and
Recheck

6 Speedo Fitting Low Bolt Torque Retorque Bolt and
Recheck

Seal Damaged Remove and Replace Seal

7 Servo Cover "O" Ring Damaged Remove and Replace "O"
Ring
ITEM PART NAME LEAK CASE CORRECTION

8 Cooler Fittings Low Fitting Torque Retorque Fitting and
Recheck

Cracked Fitting Replace and Retorque
Fitting

11 Converter Assembly Hub or Seam Weld Remove and Replace
Leak Converter

12 Converter Seal Seal Damaged Remove and Replace
Seal

13 Vent Leaking Check for the
following and correct as necessary

A) Oil Overfill
B) Blocked Drainback holes in sprocket support
C) Engine Coolant in oil