A/T - Rough Neutral to Drive Shift
Bulletin 84-7125-2ADate Sept. '84
Ref. No. 84-308-7125
SUBJECT: ROUGH NEUTRAL TO DRIVE SHIFT
MODELS AFFECTED: ALL 1982 THRU 1984 THM 125/125-C TRANSAXLES
NOTE: This Bulletin supersedes Bulletin 84-7125-2. Please discard previous bulletin and replace it with this one. Serial number break points were incorrect in the original bulletin.
Some 1982 thru 1984 THM 125/125-C transaxles may exhibit a rough neutral to drive shift condition.
Beginning in December, 1983, a new forward clutch wave plate, part number 8652126 went into production on THM 125C model transaxles. The chart below provides model and serial number break points for installation of the new wave plate on 1984 models. All 1982 and 1983 models and all 1984 units assembled prior to these break points have the past model wave plate.
Therefore, when servicing any 1982 thru 1984 model THM 125/125C transaxles for this harsh neutral to drive condition the new wave plate part number 8652126 should be installed. Refer to the appropriate service manual for removal and replacement instructions.
MODEL SERIAL NO.
CA 2724
CB 221301
CE 77876
CF 7881
CT 4840
MODEL SERIAL NO.
PD 2508
PE 64573
PF 31776
PG 63043
PJ 8148
PW 82620