Rear Quarter Trim Finishing Panel Fastener - Loose

Bulletin 84-10-6

Date Dec. '83

Ref. No. 84-079-10
SUBJECT: LOOSE REAR QUARTER TRIM FINISHING PANEL FASTENER

MODELS AFFECTED: ALL 1984 CENTURY 19 AND 27 STYLES

FIGURE 1:

If a loose rear quarter trim finishing panel to fasteners are encountered, the condition may be repaired by installing the fastener to the trim panel using adhesive backed body side molding foam tape (3M-06380 or equivalent) followed by the installation of cloth-backed waterproof body tape as shown in Figure 1. The cloth-backed body tape is used to provide adequate retention of fastener to trim panel and prevent peel load on tape.