Suspension - High Front Standing Height
Bulletin 84-10-17Date June '84
Ref. No. 84-216-10
SUBJECT: FRONT STANDING HEIGHT
MODELS AFFECTED: 1984 RIVIERA CONVERTIBLE
Some 1984 Riviera Convertibles may experience a high front standing height condition. Front standing height should be within the specifications listed below. If standing height cannot be brought within specification by torsion bar adjustment, torsion bar rear anchor arms should be checked..
Riviera Convertibles should be equipped with FK2 torsion bar rear anchor arms (P/N 22505389) which may be identified by a dab of green paint. If a vehicle is not equipped with FK2 anchor arms, install FK2 anchor arms and adjust torsion bars to correct front standing height.
For warranty purposes, use labor Operation No. E3300 at 1.0 hour to adjust or E3337 at 1.7 hours to replace anchor arms.
DIMENSION SHOWN AT CURB WEIGHT (FULL TANK OF FUEL, NO PASSENGER OR LUGGAGE LOAD)