Child Seat With Top Strap - Instructions
Bulletin 84-10-16Date June '84
Ref. No. 84-260-10
SUBJECT: DEALER INSTALLED ANCHOR FOR CHILD SEAT WITH A TOP STRAP
MODELS AFFECTED: 1984 SKYLARK
TOP STRAP ANCHOR INSTALLATION - X BODYDOOR (11 & 37) AND 4-DOOR (69) NOTCHBACK STYLES:
The attached instructional sheet is a continuation of previously issued bulletin 84-10-7 and complete the subject information on 1984 models. The general instructions for installation of the child seat top strap are covered in the original bulletin. The figure covers the specific instructions for
Skylark.
STEP #1 From the trunk area locate the appropriate 8 mm (5/16") hole on the underside of the filler panel.
STEP #2 Using a punch or other sharp tool, punch a locating hole through the center of the trim covering the 8 mm hole.
STEP #3 From inside the vehicle cut a 8 mm (5/16") hole through the filler panel trim using the locating hole as a guide.