Tools - Rear Axle Differential Pinion Shaft Remover
Bulletin: 86-04-1Date: Nov., '85
Ref..No: 86-037-4
SUBJECT: REAR AXLE DIFFERENTIAL PINION SHAFT REMOVER KENT-MOORE TOOL J-35640
MODELS AFFECTED: ALL REAR WHEEL DRIVE VEHICLES WITH "C" LOCK DIFFERENTIAL ASSEMBLIES
Attached is a combination brochure and order form for a new tool released by Kent-Moore to remove a differential pinion shaft when the lock screw is broken. This reasonably priced tool will save technician time and will efficiently remove the pinion shaft without damage to the differential case assembly when the lock screw is broken. This means less vehicle down time and reduced repair expense which translates into increased customer satisfaction.
Kent-Moore will pay freight charges on all J-35640 orders received prior to December 31, 1985.
Please review and route this available tool information to your Service Manager and technicians.
"We believe this source and their products to be reliable. There may be additional manufacturers of such products. Buick does not endorse, indicate any preference for, or assume any responsibility for the products or equipment from this firm or for any such items which may be available from other sources."