Manual Shift Linkage Adjust
MODELS LESS CABLE LOCK ADJUSTMENT1. Place shift selector lever in Neutral position.
2. On column shift models ensure that transaxle control cable is properly assembled to pin, steering column shift lever pin and transaxle control cable bracket.
3. On console shift models, ensure that transaxle control cable is properly assembled to shift control assembly and at transaxle control cable bracket.
4. Loosen nut securing cable to pin on transaxle manual lever.
5. Ensure that transaxle manual lever is in park position by rotating lever clockwise from Park position, through Reverse detent into Neutral.
6. Hold position on manual lever and torque retaining nut to 20 ft. lbs.