Water Pump: Service and Repair

(Figure 1) Water pump Installation:

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Engine coolant.
3. Drive belts.
4. Radiator and heater hose.
5. Water pump attaching bolts.
6. Water pump.
7. Clean water pump mating surfaces.

INSTALL OR CONNECT
1. A 2mm (3/32") bead of sealant on the water pump sealing surface.
2. Water pump attaching bolts with sealer and tighten to specification, refer to figure 1.
3. Radiator and heater hose.
4. Accessory drive belts to proper tension.
5. Engine coolant.
6. Negative battery cable.