Body - Grand National Car Option (WE2) Available
Bulletin 86-10-12ADate June '87
Ref. No. 86-074A-10
Corp. Ref. No. 601009
SUBJECT: LESABRE "GRAND NATIONAL"
MODELS AFFECTED: 1986 LESABRE CUSTOM COUPE WITH SALES OPTION CODE WE2
NOTICE: This bulletin supersedes bulletin 86-10-12, dated March, 1986, for addition of part number for Front Bumper Fascia.
A speciality car option (WE2) was recently made available. This limited edition LeSabre "Grand National" comes either in black (41) or white (40) exterior color and gray interior trim. The cars will be distributed mainly in Jacksonville and Atlanta Zones.
Parts specific to the 1986 LeSabre "Grand National" are available through GMWDD. Right side part numbers are indicated first followed by left where applicable:
Part Name Part Number
"B" Pillar Applique 20615644-5
Applique Retainer 20494326-7
Quarter Window Close Out 20644852-3
Quarter Panel Quarter Window 20661598-9
Screw-Quarter Window (8) 20662075
Front Door Window Scalp Molding 20644816-7
Quarter Scalp Molding 20644802-3
Front Door Belt Molding 20644812-3
Quarter Belt Molding 20644808-9
Emblem - Front Fender (2) 25516222
Floor Mat - Front (2) 25528310
Hood Ornament 25526147
Front Bumper Fascia 25530221
The Quarter Panel Quarter Window module is a tape and break design (see 1986 Body Service Manual pages 11-12 and 13), however, the quarter window close out panels (P/N 20644852-3) are serviceable.
To replace quarter window close out panel:
1. Remove exterior reveal molding.
2. Remove the four (4) screws along top edge of close out panel.
3. Slide and work close out panel forward.
NOTICE: Do not pull outboard on leading edge of panel while working forward or front retaining tabs could be damaged.
To install close out panel reverse the above procedure.
The quarter panel quarter window module does not include the quarter window close out panel, therefore both must be ordered for complete replacement.