Operation CHARM: Car repair manuals for everyone.

A/T - 4T60 Oil Pan Bolt Leaks

90buick13
Bulletin 91-7440-2

Date July '90

Ref. No. 91-005-7440

Corp. Ref. No. 077120R

SUBJECT: TRANSAXLE OIL PAN BOLT LEAKS - SERVICE ON APPLYING SEALANT TO PAN BOLT(S)

MODELS AFFECTED: 1984-1991 HYDRA-MATIC 4T60 (THM 440T4)


BULLETIN COVERS:

Whenever the oil pan has been removed on any Hydra-Matic 4T60 (THM 440T4) transaxle, it may be necessary to use LOCTITE 242 (R) (or equivalent) to reduce the potential for fluid leaks on any blind (not through) bolt holes for oil pan bolts.

SERVICE PROCEDURE:

If the transaxle has a leak from any oil pan bolt, clean the bolt(s) and bolt hole(s) in the transaxle case with a suitable solvent to insure that it is free of dirt and transmission fluid. Apply Loctite 242 (R) (or equivalent) to the bolt per the sealant manufacturer's instructions and allow the compound to cure according to the sealant manufacturer's recommendations.

IMPORTANT:

The fluid leak could also be caused by a cut or damaged 1-2 servo seal or other damaged seals or gaskets in the leak area, or by transaxle case porosity. If necessary, use one of the fluid leak diagnosis methods, such as powder or black light and dye methods listed in section 7A of the Service Manual. Correct the leak as necessary.

SERVICE PARTS INFORMATION:

Part Number Description

12345382 Loctite 242 (R) (or equivalent)

Parts are currently available from GMSPO.