Body - Rattle or Chatter in Door Glass Area
Bulletin 86-10-13Date Mar. '86
Ref. No. 86-065-13
SUBJECT: PROCEDURE TO ELIMINATE RATTLE OR CHATTER CONDITION BY REWORKING FRONT DOOR GLASS ASSEMBLIES
MODELS AFFECTED: 1986 RIVIERA
1986 Rivieras built prior to VIN 1G4EZ57B3GU402576 that exhibit a chatter or rattle condition in the door glass area, can be repaired using the following rework procedure.
1. Remove door glass assembly (see procedure in Section 5 of the Body Service Manual).
2. Lay glass assembly on a flat protected surface and using a sharp knife, scribe a line 4 mm (11/64") on the rear guide assembly as shown in attached illustration.
FRONT DOOR GLASS ASSEMBLY:
3. Using a coarse file, file off 4 mm (11/64") of rear guide as shown in attached illustration (make sure finished edge is smooth by filing edge using a fine file).
4. Install door glass assembly.