Oil Charge

V-5 COMPRESSOR SYSTEM 240ml (8 fl oz)

NOTE: Use 525 viscocity refrigerant oil on all compressors.

New oil quantities must be added to the system during component replacement and conditions stated as follows:

With no signs of excessive oil leakage

- Compressor - Remove, drain oil, measure, and replace same amount of new oil plus 3Oml (1 fl oz).
- Evaporator - Add 90ml (3 fl oz).
- Condenser - Add 30ml (1 fl oz).
- Accumulator - Remove, drain oil, measure, and replace the same amount of new oil plus 90 ml (3 fl oz) to compensate for that retained by the original accumulator desiccant. If no oil can be drained from old accumulator, add 60 ml (2 fl oz) new oil to the new accumulator.