Quarter Window Insert - Replacement
Bulletin 86-10-4ADate June '86
Ref. No. 86-042A-10
SUBJECT: QUARTER WINDOW INSERT REPLACEMENT
MODELS AFFECTED: 1986 SOMERSET
NOTICE: This Bulletin supersedes 86-10-4 dated November, 1985, for addition of part numbers. Please discard original Bulletin and replace it with this one.
The quarter window insert can be removed and installed without replacing of the quarter window. The following procedure should be used for removal and installation of the insert.
Removal and Installation
1. Tape front edge of quarter module.
QUARTER WINDOW MOLDING:
2. Using a flat-bladed tool, pry insert loose (see illustration).
3. Apply 1/8" bead of urethane on quarter window (see illustration).
4. Install insert (see illustration).
5. Remove tape.
Parts Information For Insert
20676756 Right Limited 20676757 Left Limited 20669606 Right Custom 20669607 Left Custom 20574322 Right T-Type 20574323 Left T-Type