Lighted Vanity Mirror - Wire Pinching
87buick12Bulletin: 87-9-5
Date: Nov., '87
Ref. No.: 87-203-9
Corp. Ref. No.: 738104
SUBJECT: LIGHTED VANITY MIRROR WIRE PINCHED BETWEEN INNER AND OUTER ROOF PANELS
MODELS AFFECTED: 1987 CENTURYS
Condition:
The wire to the lighted visor vanity mirror may have excess length, which may be trapped between the inner and outer roof panels (see illustration). The trapped wire may then be pinched or cut by the visor mounting screws. This then blows the 20 amp courtesy fuse.
Correction:
1. Disconnect negative battery cable.
2. Remove visor.
3. Remove garnish molding, and any other trim necessary, then pull down inner roof panel to gain access to wiring.
4. Repair wiring as necessary. Tape wire out of the way of the visor mounting holes.
5. Reinstall inner roof panel and mouldings previously removed.
6. Reinstall visor.
7. Reconnect negative battery cable.
WARRANTY INFORMATION
Use existing labor operations.