A/T - 3T40, 125/125C New Spring Dowel Case Cover Pins

SIL 89-23 (June)

Hydra-matic 3T40/THM 125/125C (1989)

SUBJECT: New Spring Dowel Case Cover Pins




New Spring Dowel Case Cover Pins (101) for the Case Cover (401) to Case (15) that are hollow in design to prevent coming out of the case while the Case Cover is removed during service and/or reassembly of any THM 125/125C, Hydra-matic 3T40. (Refer to Figure 1)

DATE OF PRODUCTION CHANGE:

The new Spring Dowel Case Cover Pins went into production November 14, 1988 (Julian Date 319).

SERVICE ACTION:

The new Pins can be used to service all past model THM 125/125C, Hydra-matic 3T40 transaxles. Do not mix new style Spring Dowel Case Cover Pins with previous style Dowel Pins. (Refer to Figures 2 and 3)

If removal of the old Pin is necessary, use the following procedure:




1. Grasp the sides of Dowel Pin, twist and pull out of Case. (Figure 2)




2. Install the new Pin by squeezing the Pin together and seating in the Case. (Figure 3)

SERVICE PARTS INFORMATION:

When ordering new Spring Dowel Case Cover Pins, refer to the following part number.

PART NUMBER PACKAGE DESCRIPTION

8665946 2 Pins, Spring Dowel