Computers and Control Systems: Technical Service Bulletins
- Customer Interest
- Electrical - MIL ON/DTC's Set By Various Control Modules
- Electrical - Intermittent MIL/DTC P2138/Reduced Power
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- Engine - Decel Stall or Long Crank on Start-Up
- Connector Terminals - Contact Checking Procedure
- MIL ON, Intermittent TCC, DTC 62/26 Set
- Engine Controls - Intermittent Code 44/False Code 48
- Engine Controls - Run-On With Ignition OFF
- Engine Controls - Shorted IAC Motors & Poor Driveability
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- Electrical - MIL ON/DTC's Set By Various Control Modules
- Electrical - Intermittent MIL/DTC P2138/Reduced Power
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- Engine - Decel Stall or Long Crank on Start-Up
- Connector Terminals - Contact Checking Procedure
- MIL ON, Intermittent TCC, DTC 62/26 Set
- Engine Controls - Intermittent Code 44/False Code 48
- Engine Controls - Run-On With Ignition OFF
- Engine Controls - Shorted IAC Motors & Poor Driveability
- Driveability
- Erratic Shifting
- False instrument warning light/gauges
- Low, Dead battery
- All Technical Service Bulletins
- Engine - THIS BULLETIN HAS BEEN CANCELED
- Electrical - MIL ON/DTC's Set By Various Control Modules
- Electrical - Intermittent MIL/DTC P2138/Reduced Power
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- Engine - Decel Stall or Long Crank on Start-Up
- Connector Terminals - Contact Checking Procedure
- MIL ON, Intermittent TCC, DTC 62/26 Set
- Oxygen Sensor Test - Revised Tech 1 Mass Storage CD
- MAP - Revised Chart C-1D, DTC's 33, 34, 63, 64
- Cam Sensor Circuit - Revised Code 41
- Engine Controls - Intermittent ECM Connection
- Engine Controls - Damage to Wiring Terminals
- Engine Controls - Updated Code 48 (Misfire) Chart
- Engine Controls - Updated Code 26 (Quad Driver) Chart
- Battery - Revised Ammeter Connecting (Parasitic Drain)
- Engine Controls - Intermittent Code 44/False Code 48
- Engine Control - SES ON & False Code 48 (Misfire)
- Engine Controls - Run-On With Ignition OFF
- Engine Controls - Shorted IAC Motors & Poor Driveability
- Oxygen Sensors - Silica Contamination
- Engine Controls - Use of Crank Sensor Adjusting Tool
- Engine Controls - Crankshaft Sensor Adjusting Procedure
- PROM/MEMCAL - Identification Marks