Parts, Service Procedure, Campaign Label, Parts Disposition & Warranty
PARTS INFORMATIONParts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). To ensure these parts will be obtained as soon as possible, they should b ordered from GMSPO on a "C.I.O. order with NO special instruction code, but on an advise code (2).
Part Number Description Quantity/Vehicle
20564741 Latch Assembly - Hood (Secondary) 1
SERVICE PROCEDURE
1. With hood open, remove two (2) attaching bolts retaining secondary latch assembly and remove latch.
2. Install new (Part Number 20564741) latch assembly and torque bolts 10-14 N-m (7-10 ft.lbs.).
3. Close hood and check secondary latch for proper operation.
4. Install Campaign Identification Label.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign bulletin will require a "Campaign Identification Label". Each label provides a space to include the campaign number, the five (5) digit dealer code of the dealer performing the campaign service and the date the vehicle was campaigned. This information may be inserted with a typewriter or a ball point pen. Install the label only on a clean, dry surface of the radiator baffle where it is readily visible.
DISPOSITION OF PARTS
Replaced parts must be held for disposition by Buick Zone or Branch contact personnel. Parts must have a claim tag attached showing the repair order and the VIN of the vehicle from which they were removed.
WARRANTY INFORMATION
A separate repair order must be used for each vehicle. A completed warranty claim is to be kept as a permanent record of completion.
* .1 hour for administration
** List the current dealer price of parts, plus 30%.