From Top

Remove or Disconnect
1. Battery cables
2. Hood
3. Airflow tube at air cleaner and throttle valve
4. Necessary electrical wiring
5. Throttle, T.V., and cruise control cables
6. Relieve fuel line pressure
7. Fuel lines
8. A.I.R. belt
9. Serpentine belt cover and belt
10. Radiator hoses
11. A/C mounting bolts at front mounting bracket
12. Power steering pump from engine and set aside
13. Heater hoses at engine
14. Brake booster vacuum supply line
15. EGR at exhaust
16. Raise vehicle.
17. A/C compressor from engine
18. Flywheel cover
19. Starter
20. Torque converter bolts
21. Transaxle bracket
22. Engine front mount retaining nuts

Rotating Engine:

23. Exhaust pipe at crossover
24. Lower vehicle.
25. Crossover pipe to manifold clamps
26. Rotate Engine
27. Bulkhead connector
28. Rotate engine back to its normal position. Refer to Rotate Engine Assembly. Rotating Engine Assembly
29. Support transaxe.
30. Transaxle bolts
31. Attach lifting device.
32. Engine assembly

Install or Connect
1. Engine assembly
2. Remove lifting device.
3. Transaxle bolts
4. Remove transaxle support.
5. Rotate engine.
6. Bulkhead connector
7. Rotate engine back to its normal position. Refer to Rotate Engine Assembly. Rotating Engine Assembly
8. Crossover pipe to manifold clamps
9. Coolant recovery bottle
10. Torque struts
11. Raise vehicle.
12. Exhaust pipe to crossover
13. Engine front mount retaining nuts
14. Transaxle bracket
15. Torque converter bolts
16. Starter
17. Flywheel cover
18. A/C compressor to engine
19. Lower vehicle.
20. EGR to exhaust
21. Brake booster vacuum supply line
22. Heater hoses to engine
23. Power steering pump
24. A/C mounting bolts to front mounting bracket
25. Radiator hoses
26. Serpentine belt and belt cover
27. A.I.R. belt
28. Fuel lines
29. Throttle, T.V., and cruise control cables
30. Necessary electrical wiring
31. Airflow tube to air cleaner and throttle valve
32. Hood
33. Battery cables

Inspect
^ Proper fluid levels
^ Leaks
^ Completion of repair