Blower Motor: Service and Repair

1. Disconnect battery ground cable.
2. Disconnect cooling tube, if equipped.
3. Disconnect blower motor harness leads.
4. Remove mounting screws, then remove blower motor and cage assembly.
5. Remove cage by removing retaining nut.
6. Reverse procedure to install.
7. Remove spark plug wires and coil if nessary.



CUTLASS SUPREME, GRAND PRIX & REGAL

1. Disconnect battery ground cable.
2. Remove right hush panel under instrument panel.
3. Remove electrical convenience center by removing rear screws, loosening front screw and sliding unit out.
4. Disconnect electrical connector at blower motor, then remove wire harness from clip.
5. Remove blower motor mounting screws, then the blower motor.
6. Reverse procedure to install.