Trunk - Rear Compartment Access Door Rattle
90buick11 Bulletin 89-10-36Date Aug. '90
Ref. No. 89-291-10
Corp. Ref. No. 001003
SUBJECT: REATTA REAR COMPARTMENT ACCESS DOOR RATTLE (NEW COATED LATCH PIN)
MODELS AFFECTED: 1988-89 REATTA
If an owner should comment about a rattle in the area of the rear compartment access door, it can sometimes be corrected by installing a new coated rear compartment access door latch pin, part number 20702007. (2 required)
Use the following procedure to install the latch pins:
1. Open the rear access door and locate the two (2) latch pins at the upper corners of the opening.
2. Holding the latch pin in position with a 14 mm wrench, reach through the opening to remove the 13 mm nut and washer.
3. Remove the latch pins and replace with part number 20702007. Reinstall the washers and nuts.
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
Labor Operation No.: T6478
Labor Operation Time: .2 hr.