Stabilizer Shaft Front Insulator

Figures 1 and 1A

REMOVE OR DISCONNECT

1. Raise vehicle, refer to General Information (Section OA).

2. Scribe strut to knuckle.

3. Strut/upper auxiliary spring bracket/stabilizer shaft bracket nuts.

CAUTION:
LEAF SPRING IS UNDER HIGH TENSION. DO NOT REMOVE BOLTS AS PERSONAL INJURY COULD RESULT.

4. Pull insulator bracket from bolts.

5. Insulator from stabilizer shaft.

INSTALL OR CONNECT


1. Insulator to stabilizer shaft.

2. Strut/upper auxiliary spring bracket/stabilizer shaft bracket nuts.

- Align marks to ensure proper alignment.

Tighten

- Nuts to 180 N-m (133 lb.ft.)

3. Lower vehicle.