Interior Trim - I/P Pad Loose From Base Carrier Assembly

89buick06

Bulletin 89-10-11

Date Mar. '89

Ref. No. 89-108-10

Corp. Ref. No. 931003R

SUBJECT: INSTRUMENT PANEL PAD LOOSE FROM BASE CARRIER ASSEMBLY

MODELS AFFECTED: 1988 AND 1989 BUICK REGAL


Regluing loose instrument panel pads to the base may be accomplished with the use of Loctite(R) Super Bonder

1. Remove instrument panel pad and place on clean work surface.

2. Carefully remove vinyl backing from foam pad at loose area.

3. Apply Loctite (R) Super Bonder to pad following manufacturers instructions.

"We believe this source and their product to be reliable. There may be additional manufacturers of such products. General Motors does not endorse, indicate any preference for or assume any responsibility for the products from this firm or for any such items which may be available from other sources."

WARRANTY INFORMATION

Labor Operation Number: C2500
Labor Time: .4 Hour Remove and Replace Pad .2 Hour Reglue .6 Hour
Trouble Code: 92