Transmission and Drivetrain: Technical Service Bulletins
- Customer Interest
- MIL ON, Intermittent TCC, DTC 62/26 Set
- A/T - 3T40 Accelerator Pedal Buzz
- A/T - Slips in Reverse/No Reverse
- A/T - Harsh 3-2 Downshift at High Altitude
- A/T - Intermittent Second Gear Start in D2 When Cold
- A/T - Bearing Audible Whine in 1st, 2nd, and 3rd Gear
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- A/T - No Movement in Drive or 3rd Gear
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- MIL ON, Intermittent TCC, DTC 62/26 Set
- A/T - 3T40 Accelerator Pedal Buzz
- A/T - Slips in Reverse/No Reverse
- A/T - Harsh 3-2 Downshift at High Altitude
- A/T - Intermittent Second Gear Start in D2 When Cold
- A/T - Bearing Audible Whine in 1st, 2nd, and 3rd Gear
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- A/T - No Movement in Drive or 3rd Gear
- Driveability
- Erratic Shifting
- Hard Shifting
- Inoperative
- No shift/Incorrect gear engagement
- Noise
- Slipping
- Vibration
- All Technical Service Bulletins
- Drivetrain - Information on Driveline Clunk Noise
- Vehicle - Engine And Sub Systems Flushing Info. (CANADA)
- Vehicle - Engine And Sub-Systems Flushing Recommendations
- M/T - Operating Characteristics Information
- A/T - Fluid Oil Cooler Flow Test
- A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise
- A/T - Slight Vehicle Movement In Park At Start Up
- A/T - Transaxle Oil Filter Differences
- A/T - Oil Cooler Flushing Frequently Asked Questions
- ECM - Revised Wiring Diagram and Chart C-8A TCC
- MIL ON, Intermittent TCC, DTC 62/26 Set
- Speedometer Gear - Chart Update
- PROM - Hesitation, Sag/Chuggle On Accel During Warm-Up
- A/T - 3T40 Accelerator Pedal Buzz
- A/T - Clarify DTC 62, 2ND Gear Switch Location, ECM
- A/T - 3T40 New Roller Clutch
- A/T - THM 440T4/4T60E New Clutch Plates
- A/T - Revised Direct Clutch Housing
- A/T - No Reverse, Slips In Low/Reverse
- A/T - Slips in Reverse/No Reverse
- A/T - Harsh 3-2 Downshift at High Altitude
- A/T - Revised Park Bracket Bolts
- A/T - Intermittent Second Gear Start in D2 When Cold
- A/T - Bearing Audible Whine in 1st, 2nd, and 3rd Gear
- A/T - Core Return Product Feedback Form
- A/T - 3T40 Pedal Buzz Under Light Throttle
- A/T - Engine Vacuum Testing
- A/T - How To Use A Pressure Gauge
- A/T - Drive Axle and Wheel Lug Nut Torque Specifications
- A/T - Slipping or No-Shift/Metal Sealing Rings
- A/T - Front Bushing Wear
- A/T - Math Formulas Part I
- A/T - Twenty Steps To Successful Repairs
- A/T - Math Part II
- A/T - Choosing the Right ATF
- A/T - New Transmission/Transaxle Fluid
- A/T - Servicing Vehicles With Contaminated ATF
- A/T - DEXRON III Fluid Introduction
- A/T - Revised Code 62 Chart (Gear Switches Circuit)
- A/T - Evaluating Peened Spacer Plates
- A/T - New Reverse Band Apply Pin Gage
- A/T- 3T40 New Side Cover and Bottom Pan Gasket
- M/T - Hydraulic Clutch Bleeding Procedure Improvement
- Engine, A/T - Shift/Driveability Concerns/MIL ON
- A/T - No Movement in Drive or 3rd Gear
- A/T - Grinding/Growling Noise in Park on Incline
- A/T - Water Or Coolant Contamination Information
- A/T - DEXRON(R)-VI Fluid Information