Connector Snap

1. Fabricate a template using a metal material as pictured in the illustration.
2. Fill center ring of snap with solid core solder as illustrated.
3. Place the snap in the hole in the template so that the solder is facing upward.
4. Gently pull back the headliner at the center of the rear glass to expose the snap location.
5. Tape the template to the backlite positioning the snap in place.
6. Hold a flat-ended solder gun on the snap for 1 minute. Take care not to touch the headliner with the solder gun.
7. Remove the template and attach the cable connector to the snaps.
8. Test the remote keyless entry functions.