L: Ignition Switch Open Test

Connect a fused jumper form Coolant Temperature Sensor connector (DK GRN) or (DK GRN/WHT) to ground. Turn the Ignition Switch to RUN. Observe the Temperature Display.

e If the display now shows hot, check/repair the Ignition Switch and DK GRN and/or DK GRN/WHT wires for an open (see schematic).

^ If the Display still shows cold, check for an open in the DK GRN (35) and/or DK GRN/WHT(635) wires to the Instrument Cluster.