Troubleshooting Hints
^ Try the following checks before doing the System Check.1. Check the BELT Fuse by visual inspection.
2. If the Safety Belt remain taut with either front door open, check for a shorted Door Latch Switch.
3. The Key Cylinder Light should glow when either Door Latch Switch is operated. If only one switch does not trigger the light, check the associated switch and wiring. The Safety Belt Retractor Solenoids should click when the switch is operated.
4. If the Safety Belt Retractor Solenoids in both doors do click, but the Key Cylinder Light does not light, check the YEL (528) and BLK (152) wires to the light for an open. If wires are OK, replace the Key Cylinder Light.
^ Go to System Check for a guide to normal operation. Initial Inspection and Diagnostic Overview