Brakes - Revised Rotor Thickness Specifications

Bulletin: 93-5-5

Date: Feb. '93

Ref.No.: 93-99-5

Corp.Ref.No.: 335002

SUBJECT:
SERVICE MANUAL UPDATE - SECTION 5 - BRAKE ROTOR SPECIFICATIONS REVISIONS

MODELS AFFECTED:
1991-93 SKYLARK

This bulletin is an update to Section 5, brake rotor specifications for the Skylark series. Only the corrections are listed below for the 1991-93 service manuals.

1991: Minimum thickness after refinish should be 19.08 mm (.751).

1992: Minimum thickness after refinish should be 19.08 mm (.751).

1993: Maximum thickness should be 20.48 mm (.806).