Radio/Stereo: Service and Repair

When installing radio, be sure to adjust antenna trimmer for peak reception. Also, be sure to connect speaker before applying power to radio.

1. Disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Disconnect battery ground cable.
3. Remove steering column lower trim panel, then remove lefthand trim panel.
4. Remove radio bracket to instrument carrier attaching screws, then pull radio and bracket assembly outward.
5. Disconnect radio and antenna electrical connectors.
6. Remove radio to bracket attaching nuts, then remove radio.
7. Reverse procedure to install.