Alignment - Revised Specifications

9217buick02

Bulletin: 92-3-10

Date: Mar. '92

Ref. No.: 92-193-3

Corp. Ref. No.: 233101


SUBJECT:
SERVICE MANUAL UPDATE - SECTION 3A-6 WHEEL ALIGNMENT SPECIFICATIONS (CAMBER SPECS CHANGED)

MODELS AFFECTED:
1991-92 ROADMASTERS





SERVICE MANUAL UPDATE - SECTION 3A-6

Change in camber specification from 0.8 +/-0.8 degrees to 0.0 +/-0.8 degrees and correction for individual toe setting from 0.8 +/-0.1 degrees to 0.08 +/0.1 degrees. VEHICLES are not to be realigned because of this change only. If an alignment is required due to a customer comment, then use the following specifications:

NOTE: Alignment settings on new vehicles may change during the first 500 miles of use due to suspension "settling." Alignment adjustments should be made only after this break-in period.