Initial Inspection and Diagnostic Overview

System Check - Normal Operation Remote Keyless Entry/Automatic Door Locks:

*The vehicle is Initially programmed at the factory to lock all doors when the gear selector is shifted out of park, and to unlock all doors when the gear selector Is shifted back into park. However. this function can be overridden by reprogramming the RAC module as follows:

Close all doors and turn ignition switch to RUN. Depress brake pedal. Press and hold the transmitter LOCK button and cycle the gear selector out of and back into park. All doors will now lock when the gear selector is shifted out of park and remain locked until unlocked manually or the power door lock switch is operated.

The initial lock/unlock feature can be reprogrammed as follows:

Close all doors and turn ignition switch to RUN. Depress brake pedal. Press and hold the transmitter UNLOCK button and cycle the gear selector out of and back into park.