Coupe

Door Lock Module:

The automatic door lock system has an actuator in each door which actuates the lock through a linkage. The system is actuated by the chime module in the convenience center or by any door lock switch. All doors lock or unlock at the same time except when the actuator is manually activated by a lock rod. Each actuator has an internal circuit breaker which may require one to three minutes to reset.

Remove or Disconnect

1. Door trim panel.
2. Water deflector.
3. Two screws on opposite corners of actuator.
4. Electrical connector.
5. Actuator by disengaging from linkage.

Install or Connect

1. Actuator to linkage.
2. Electrical connector.
3. Screws.

Inspect
^ For proper operation by cycling system.

4. Water deflector.
5. Door trim panel.