Troubleshooting Hints - Gauges Cluster

1. Check the INDIC, ELEC, and CLUST Fuses by visual inspection.
2. Check that grounds G1O3, G108, G119, G200 and G322 are clean and tight.
3. Check the indicator bulbs.
4. If more than one indicator is out, check the Instrument Cluster Printed Circuit for flaws.
5. If the Auxiliary Gages Cluster does not function, check for poor connection at the Auxiliary Gages Cluster.

^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check.
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.