Door Upper Trim Pad - Vinyl Loose

Group Ref.: Body

Bulletin No.: 431023

Date: April, 1994

SUBJECT:
VINYL LOOSE ON DOOR UPPER TRIM PAD (RE-GLUE)

MODEL:
1992-94 BUICK REGAL SEDAN

CONDITION:

Some owners may comment that the vinyl trim separates from substrate on door upper trim pad.

CORRECTION:

Re-glue vinyl to substrate.

1. Remove door trim pad and place on clean work surface.

2. Remove upper portion of trim pad from lower by removing retainers from back side.

3. Re-glue vinyl to substrate using 3M # 8046 top and trim adhesive or 3M # 8090 super trim adhesive (or equivalent) following manufacturers instructions.

4. Reassemble trim pad and install on vehicle.

WARRANTY INFORMATION:

For vehicles repaired under warranty, use:

Labor Operation:

C3348 Right Front,
C3358 Left Front

C3540 Right Rear,
C3541 Left Rear

Use Published Labor Operation time plus 0.1 Hr. for Re-Glueing