Brake Rotor - Revised Thickness Specification

Bulletin: 93-5-8

Date: March '93

Ref.No.: 93-112-5

Corp.Ref.No.: 315002

SUBJECT:
SERVICE MANUAL UPDATE-SECTION 5-BRAKE ROTOR REVISED SPECIFICATIONS

MODELS AFFECTED:
1992-93 RIVIERA

This bulletin is an update to Section 5, Brake Rotor Specification. The corrections listed below are revised specifications for 1992-1993 Service Manual.

Front Rotor:

^ Rotor thickness (new) should be 32.20 mm (1.268").
^ Minimum rotor thickness after refinish should be 31.08 mm (1.224").

Rear Rotor:

^ Minimum rotor thickness after refinish should be 9.88 mm (0.389").

Please mark these corrections in your manual.