Inspection Procedure For Shoulder Belt Web Sew Stop

Perform the following procedure five (5) times on both the driver's and right front passenger's shoulder belts.

1. Hold the shoulder belt latch plate in one hand and pull the shoulder belt all the way out with the opposite hand.

2. At full extension, move the belt webbing to minimize contact with the head rest guide loop.

3. Allow the webbing to retract as quickly as possible, keep the latch plate in your hand to prevent its weight from slowing the webbing down.

If the web sew stop becomes stuck in the retractor during one of these checks making the shoulder belt hard to pull out again, contact your dealer to have the web stop buttons installed.

If both belts work properly, no repair is necessary.