Troubleshooting Hints

TRY THE FOLLOWING CHECKS BEFORE DOING THE SYSTEM CHECK.

1. Check Wiper Fuse 12 by visual inspection.
2 Check the Wiper Motor Assembly connector terminal contact.
3. If Wipers cycle in and out of park position in HI, and do not operate in LO, MIST, or PULSE, check YEL (196) wire for an open (see schematic).
4. If the Wiper Motor runs but the wiper blades do not, check the wiper linkage at the wiper crank arm.
5. If the Washer does not operate, check that:
- Washer reservoir is filled.
- Hoses are not pinched or kinked.
- Hoses are correctly attached.
- Nozzles are not clogged.
6. Check connector terminal contact at connector C202, row E.
^ Go to System Check for a guide to normal operation.
^ Go to System Diagnosis for diagnostic tests.