Remote Control Door Lock Assembly Receiver

Remote Control Door Lock Receiver Assembly:

Remove or Disconnect

1. Left quarter inner rear trim finish panel assembly.
2. Electrical connectors from receiver assembly (5).
3. Bolts/screws (6) attaching receiver assembly (5) to bracket (4).
4. Receiver assembly (5).

Install or Connect

1. Receiver assembly (5).
2. Bolts/screws (6) attaching receiver assembly (5) to bracket (4), for wagon.

Tighten
^ Bolts/screws (6) to 1.9 N.m (17 lb. in.).

3. Programming the system, if necessary.
4. Electrical connector to receiver assembly (5).
5. Left quarter inner rear trim finish panel assembly.