| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| One Cylinder |
| Right Bank | 9.6 | 6.9 | A | Includes: R&I Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 1.7 | 0.0 | A | Includes: R&I Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 13.7 | 9.5 | A | Includes: R&I Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| All Cylinders |
| Right Bank | 11.8 | 8.4 | A | Includes: R&I Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 11.8 | 8.3 | A | Includes: R&I Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 17.6 | 12.3 | A | Includes: R&I Cylinder Heads & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| To Renew Main Bearings, Add | 1.6 | 0.0 | A | |
| To Renew Piston, Pin or Connecting Rod, Add |
| One | 0.2 | 0.0 | A | |
| Each Additional | 0.1 | 0.0 | A | |
| All | 0.9 | 0.0 | A | |
| To Grind Valves, Add | 3.8 | 2.7 | A | |
| To Renew Crankshaft, Add | 4.8 | 0.0 | A | |
| To Renew Oil Pump, Add | 1.0 | 0.0 | A | |
| To Clean Oil Pump Screen, Add | 0.2 | 0.0 | A | |
| To Renew Rear Main Oil Seal, Add | 1.1 | 0.0 | A | |
| To Renew Timing Chain, Add | 1.4 | 0.0 | A | |
| To Perform Tune-Up, Add | 0.8 | 0.0 | A | |