Inside Handle Bezel

Door Trim Panel Assembly - 2 Door Shown:

Remove or Disconnect

1. Pull handle.
2. Escutcheon (2) by prying inboard at bottom corner.
3. Lock rod knob.
4. Escutcheon (1) by rotating escutcheon inboard and pulling rearward to disengage flange from trim panel.
5. Electrical connector if present.

Install or Connect

1. Electrical connector.
2. Escutcheon (2) to trim panel, inserting flange in front end of trim panel opening.
3. Align studs to retainers and apply pressure on escutcheon (2) to secure.
4. Lock rod knob.
5. Pull handle.