Inside Door Handle

Inside Remote Handle:

All inside remote handles are pull-in type. All remote handles actuate the door lock through a connecting rod.

Remove or Disconnect

1. Door trim panel.
2. Peel away water deflector.
3. Screw (3).
4. Drill out rivet (2) using a 3/16" drill bit.
5. Slide handle (1) forward to disengage retainer (4) from inner door panel.
6. Inside handle to lock rod (5) from handle (1).
7. Handle (1) from inner door panel.

Install or Connect

1. Handle (1) to inner door panel.
2. Inside handle to lock rod (5) to handle (1).
3. Align retainer (4) to slot on inner door panel and slide rearward to secure.
4. Rivet (2).
5. Screw (3).
6. Water deflector.
7. Trim panel.