Troubleshooting Hints - Interior Lights

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS

NOTE:
^ If vehicle is left for 24 or more days without the Ignition Switch being put in "RUN", the Keyless Entry and Illuminated Entry features will be disabled to decrease parasitic battery drain. Putting the Ignition Switch in "RUN" will restore these features.
^ Interrupting battery voltage to the Multi-Function Alarm module by disconnecting the vehicle's battery or disconnecting the module will cause the interior lights-ON delay to be only 2 to 4 minutes, until the vehicle has travelled more than 15 miles with battery power restored to the module.
^ The Multi-function Alarm Module controls Interior Lights and generates chime alarms (refer to Audible Warning Device). It also controls Automatic Door Lock (refer to Power Locks) and Seat Belt Release Solenoids (refer to Automatic Seat Belts). Verify that all chime alarms operate before proceeding with following diagnostic text. If any chime alarms do not operate, refer to Audible Warning Device.
Audible Warning Device
Power Locks
Seat Belt Systems
1. If none of the Courtesy Lights work from the Keyless Entry, but are otherwise OK, refer to Keyless Entry. Keyless Entry
2. If only one light does not operate, check bulb and related wiring.
3. Check that the Multi-function Alarm Module is properly seated.
4. If Power Door Locks do not operate, check CTSY Fuse.
5. If Interior Lights are intermittently inoperative, check that there are no Interior Lights left ON, especially the Luggage Compartment and I/P Compartment Lights.
^ Refer to Instrument Panel, Gauges and Warning indicators for Multi-function Alarm Module access. Audible Warning Device Control Module
^ Refer to System Diagnosis. System Diagnosis - Interior Lights