Ignition Switch

Fig. 10 Ignition Switch & Electrical Connections:

WARNING:
On models equipped with Airbags, Refer to Air Bags (Supplemental Restraint Systems) Service and Repair Disarming procedures before performing any repair. Service and Repair

1. Disconnect battery ground cable.
2. Remove steering wheel and covers. Refer to Steering and Suspension / Steering / Steering Wheel.
3. Place ignition key in the off/Lock position.
4. Remove two ignition switch mounting screws, then disconnect electrical connectors and remove switch, Fig.10 .
5. Reverse procedure to install.