Rear Intake Resonator

Air Induction System Component View:

REMOVE OR DISCONNECT
1. Flex duct from rear intake resonator.
2. 6 mm attaching bolt from rear intake resonator.
3. Clamp at throttle body.
4. Rear intake resonator from vehicle.

INSTALL OR CONNECT
1. Rear intake resonator to throttle body.

IMPORTANT: Be sure rear intake resonator seals to throttle body.

2. 6 mm attaching bolt to rear resonator.

^ Tighten rear intake resonator attaching bolt to 8-12 Nm (6-9 lb ft)

3. Clamp at throttle body.

^ Tighten clamp to 4-5 Nm (35-44 lb in)

4. Flex duct to rear intake resonator.