Shift Interlock: Service and Repair

REMOVAL
1. Remove steering wheel as outlined under Steering Wheel. Refer to Steering and Suspension/Steering.
2. Place key in RUN position, then disconnect park lock cable from lock cylinder housing assembly.
3. On models with column shift, disconnect park lock cable from shift gate assembly.

INSTALLATION
1. Place key in RUN position and shift lever in PARK position.
2. Snap connector body of cable assembly to lock cylinder, ensure locking tab is fully engaged into lock cylinder housing.
3. On models with column shift, place key in Off-Lock position and pull key half way out of lock cylinder housing.
4. On all models, route cable end fitting through park lock latch, then depress adjuster button and snap cable adjuster assembly to shift gate assembly.
5. Snap cable into cable retainer, then depress adjuster button and pull cable sheathing towards lock cylinder to remove lash from system.
6. Release sheathing, then release button.